Dryer
Not Turning Off
in Ottawa?
A dryer that won’t stop running can waste energy, overheat clothing, and place unnecessary stress on internal components. Whether the dryer continues tumbling after the cycle should have ended or runs continuously until manually stopped, the problem usually involves the timer, moisture sensor, control board, or electrical controls.
YANFIX provides same-day dryer repair throughout Ottawa and diagnoses the exact cause before recommending repairs.
A dryer that keeps running after clothes are dry is more than an inconvenience. Continuous operation increases wear on belts, rollers, motors, and support components while also increasing energy consumption.
Some dryers fail to stop because the timer is no longer advancing correctly. Others continue running because the moisture sensor cannot detect that clothes are dry. Modern dryers may also experience control board failures that prevent the cycle from ending normally.
In many cases the dryer still heats, tumbles, and appears to work normally except for one problem: it never shuts off when it should.
YANFIX repairs electric and gas dryers throughout Ottawa and services Samsung, LG, Whirlpool, Maytag, GE, Frigidaire, Electrolux, Bosch, Kenmore, and other major brands.
Why Won't My Dryer Turn Off?
| Problem | What Happens | Typical Result |
| Timer failure | Cycle never advances | Dryer keeps running |
| Control board issue | Cycle doesn’t end | Continuous operation |
| Moisture sensor failure | Clothes never appear dry | Extended cycle times |
| Stuck relay | Power remains supplied | Dryer won’t shut off |
| Cycle selector problem | Incorrect cycle operation | Dryer runs continuously |
| Wiring issue | Electrical control failure | Unexpected operation |
| Control panel failure | Commands not processed correctly | Cycle never completes |
| Sensor circuit issue | Incorrect dryness readings | Dryer keeps running |
| 💡 If your dryer dries clothes normally but never stops running, the timer or control system is often responsible. |
Common Components That Cause Continuous Operation
| Component | Dryer Type | Common Failure |
| Timer | Many Models | Fails to advance through cycle |
| Control board | Electric & Gas | Fails to end cycle properly |
| Moisture sensor | Electric & Gas | Incorrect dryness readings |
| Relay | Electric & Gas | Sticks in energized position |
| Control panel | Electric & Gas | Input commands fail |
| Cycle selector | Electric & Gas | Cycle logic malfunction |
| Wiring harness | Electric & Gas | Electrical control issues |
| Sensor circuit | Electric & Gas | False moisture detection |
Failed Timer
Older dryers rely heavily on mechanical timers to advance through drying cycles.
When timer contacts wear out or internal gears fail, the timer may stop advancing. The dryer continues operating because it never receives the signal to end the cycle.
This is one of the most common causes of dryers that run indefinitely.
| 💡 If the timer dial never moves during operation, a failed timer is often the cause. |
Control Board Problems
Modern dryers use electronic control boards instead of traditional timers.
If the board develops a fault, it may fail to terminate the cycle properly. The dryer continues tumbling even after clothes are dry.
Control board failures are especially common in older electronic dryers exposed to heat and vibration for many years.
Moisture Sensor Failure
Automatic drying cycles depend on moisture sensors.
If the sensor becomes dirty, damaged, or electrically defective, it may incorrectly detect moisture and continue extending the cycle unnecessarily.
| ⚠️ If automatic cycles never end but timed cycles work normally, the moisture sensor is often the first component that should be inspected. |
Stuck Relay
Some dryers use relays to control power delivery to various components.
A relay that becomes stuck in the closed position may continue supplying power even after the cycle should have ended.
Wiring Or Electrical Control Issues
Damaged wiring, loose electrical connections, or failed control circuits can interfere with normal cycle completion.
Although less common than timer or sensor failures, electrical faults should always be diagnosed properly.
Cycle Selector Problems
Cycle selectors allow users to choose drying modes and operating settings.
If the selector fails, the dryer may become stuck in a cycle and continue running indefinitely.
Signs Your Dryer Is Not Turning Off
The Dryer Continues Running After Clothes Are Dry
The most common symptom is a dryer that keeps tumbling long after the load is already dry.
The cycle should end automatically, but the dryer continues operating until manually stopped.
The Timer Never Reaches The End
On dryers with mechanical timers, the timer dial may stop advancing.
The dryer continues running because the timer never reaches the end-of-cycle position.
| 💡 If the motor runs but the drum does not move, the drive belt is often the first component technicians inspect. |
Automatic Cycles Never Finish
Many homeowners notice that Timed Dry works normally while Sensor Dry runs indefinitely.
This often points to moisture sensor problems or sensor circuit failures.
The Dryer Runs Until Manually Stopped
Some dryers continue tumbling for hours unless the user opens the door or turns the appliance off manually.
This symptom commonly indicates timer, control board, or relay problems.
Clothes Become Overdried
When the dryer fails to stop automatically, fabrics may become excessively hot and overdried.
This can increase wear on clothing and waste energy.
.
Energy Bills Begin Increasing
A dryer that runs longer than necessary uses more electricity or gas than intended.
Many homeowners first notice the problem through increased utility costs.
| ⚠️ Continuous dryer operation increases wear on belts, rollers, motors, and support components. |
Dryer Won't Stop Running Troubleshooting Guide
| Symptom | Most Likely Cause | Recommended Action |
| Timer never advances | Failed timer | Inspect timer assembly |
| Runs only on Sensor Dry | Moisture sensor issue | Test sensor circuit |
| Runs continuously on all cycles | Control board failure | Electrical diagnosis required |
| Cycle never ends | Timer or board issue | Inspect controls |
| Runs after clothes are dry | Sensor problem | Check moisture sensor |
| Won’t shut off automatically | Relay failure | Inspect relay circuit |
| Overdries clothing | Sensor malfunction | Sensor testing recommended |
| Stops only when door opens | Control system issue | Professional diagnosis |
Why Choose Yanfix
We make appliance repair easy, fast, and reliable
Forget long waits, hidden fees, and sloppy work. At Yanfix, we treat your time and home with respect — delivering expert service you can count on.
Fast Response Times
Fast service across Ottawa and surrounding communities.
Accurate Diagnosis
We identify the exact source of washer noise before recommending repairs.
Experience With All Major Brands
Samsung, LG, Whirlpool, Maytag, GE, Frigidaire, Electrolux, Bosch, Kenmore, and more.
Upfront Pricing
Clear recommendations and pricing before any repair work begins.
What You Can Check Before Calling A Technician
Try A Timed Dry Cycle
Run the dryer using Timed Dry.
If Timed Dry works normally but Sensor Dry never ends, the moisture sensor may be malfunctioning.
Clean The Moisture Sensors
Moisture sensors are usually located inside the drum near the lint filter.
Fabric softener residue can interfere with proper operation.
Watch The Timer
Observe whether the timer advances during operation.
A timer that never moves often indicates timer failure.
Test Multiple Cycle Settings
Try different drying modes.
If the problem occurs on every cycle, control system components may require inspection.
Avoid Running The Dryer Unattended
Until the cause is identified, avoid leaving the dryer running for extended periods.
| ⚠️ If the dryer continues running indefinitely, disconnect power after use until the problem has been diagnosed. |
How Yanfix Fixes A Dryer That Won’t Turn Off
1. Verify The Symptom
We determine whether the dryer runs continuously, fails to end automatic cycles, or has timer-related issues.
2. Test Moisture Sensors
Sensor performance and sensor circuits are evaluated.
3. Inspect Timer Operation
Mechanical timers are checked for proper advancement and cycle completion.
4. Diagnose Control Boards And Relays
Electronic controls, relays, and circuit boards are tested for faults.
5. Complete Necessary Repairs
Only failed components are repaired or replaced.
6. Verify Proper Cycle Completion
The dryer is tested through complete drying cycles to ensure normal operation.
Dryer Brands We Service In Ottawa
We repair dryers that won’t stop running across all major brands sold in Canada.
Samsung Dryers
Samsung dryers commonly experience moisture sensor failures, control board issues, and cycle completion problems.
LG Dryers
LG dryers frequently develop sensor-related issues and electronic control faults that cause cycles to continue indefinitely.
Whirlpool Dryers
Whirlpool dryers often experience timer failures, moisture sensor problems, and control board issues.
Maytag Dryers
Maytag dryers commonly develop timer and sensor-related failures as components age.
GE Dryers
GE dryers frequently experience control board and cycle control problems that prevent normal shutdown.
Frigidaire, Electrolux, Bosch, KitchenAid & Kenmore
We diagnose and repair all major dryer brands and most cycle completion problems.
| 💡 If your dryer dries clothes properly but never stops running, the problem is usually related to sensors, timers, or electronic controls rather than heating components. |
Dryer Repair Cost In Ottawa
| Repair Type | Typical Cost Range (CAD) |
| Moisture sensor replacement | $120 – $220 |
| Timer replacement | $150 – $300 |
| Control board repair | $250 – $500+ |
| Relay replacement | $150 – $280 |
| Control panel repair | $180 – $350 |
| Wiring repair | $120 – $300 |
| Cycle selector replacement | $150 – $300 |
| Diagnostic inspection | $80 – $140 |
| 💡 The exact repair cost depends on the dryer brand, model, and failed component. A complete diagnosis is performed before any repair work begins. |
What Ottawa Residents Say About Yanfix
|
“Our dryer kept running long after clothes were dry. Yanfix diagnosed a faulty moisture sensor and fixed it the same day.” — Michael T., Kanata ★★★★★ |
|
“The timer never advanced and the dryer would run forever unless we stopped it manually. Fast diagnosis and professional service.” — Jennifer R., Barrhaven ★★★★★ |
|
“Excellent communication, honest pricing, and same-day repair. Highly recommended.” — David M., Nepean ★★★★★ |
Same-Day Dryer Repair Across Ottawa
We provide dryer repair services throughout Ottawa, including:
• Kanata
• Stittsville
• Nepean
• Barrhaven
• Gloucester
• Blackburn Hamlet
• Orleans
• Alta Vista
• Greenboro
• Westboro
• Hintonburg
• Centretown
• Downtown Ottawa
• Rockcliffe Park
• Manor Park
Outside these areas but still within the Ottawa region? Contact us and we’ll confirm coverage.
Our Work Speaks for Itself
Real Repairs. Real Results.
We believe that quality is best proven in action — not just words.
Below are real examples of appliances we’ve repaired.
You’ve Got Questions?
We’ve Got Answers!
Everything you need to know before you book.
Why won't my dryer turn off?
The most common causes are timer failures, moisture sensor problems, control board faults, and stuck relays.
Why does my dryer keep running after clothes are dry?
A faulty moisture sensor may incorrectly detect moisture and continue extending the drying cycle.
Can a bad timer cause a dryer to run continuously?
Yes. A failed timer may stop advancing and prevent the cycle from ending.
Why does Sensor Dry never finish?
Moisture sensors, sensor wiring, or control board problems are often responsible.
Is it dangerous if my dryer won't turn off?
Continuous operation increases wear on components and can lead to overheating if ignored.
Why do timed cycles work but automatic cycles don't?
This usually points to a moisture sensor or sensor circuit issue.
Can a control board keep a dryer running?
Yes. Modern dryers rely on electronic control boards to manage cycle completion.
Do you repair gas and electric dryers?
Yes. Yanfix services both gas and electric dryer models.
Do you offer same-day dryer repair in Ottawa?
Yes. Same-day appointments are available throughout most Ottawa service areas.
Do you repair all major dryer brands?
Yes. We repair Samsung, LG, Whirlpool, Maytag, GE, Frigidaire, Electrolux, Bosch, Kenmore, and many others.
Dryer Won’t Turn Off? We Can Help.
A dryer that continues running after the cycle should have ended is usually caused by a timer, moisture sensor, relay, or control system problem. Early diagnosis often prevents additional wear and unnecessary energy costs.
✓ Same-Day Service Available
✓ Electric & Gas Dryers
✓ All Major Brands
✓ Upfront Pricing
✓ 90-Day Repair Warranty
Book Your Dryer Repair Today →
Contact Information
- 18 Inwood Drive Kanata, Ontario, K2M 1Z5
- +1613913-30-23
- support@yanfix.com
